Stainless Steel H-Beam

Stainless steel H-beams are structural steel beams with an H-shaped cross-section. They are designed to withstand high loads and provide excellent structural support. The vertical section (web) of the beam resists shear forces, while the horizontal sections (flanges) resist bending moments. H-beams are typically produced through hot rolling, extrusion, or welding processes and are available in various sizes and grades.

PRODUCT SPECIFICATION:

RoductStainless H beam
StandardAISI, ASTM, BS, DIN, GB, JIS, etc
WebWidth: 100-900mm Thick: 5-16mm
FlangeWidth:100-400 Thick: 7-34mm
Length5.8m-12.0m or as your requirement

Chemistry Typical:

The chemical composition of stainless steel H-beams varies depending on the grade, but common grades include:

  • Austenitic Stainless Steels (e.g., 304, 316):

    • Iron (Fe): Balance
    • Chromium (Cr): 16-18% (304), 16-18% (316)
    • Nickel (Ni): 8-10.5% (304), 10-14% (316)
    • Manganese (Mn): Up to 2%
    • Silicon (Si): Up to 1%
    • Carbon (C): 0.08% max (304), 0.08% max (316)
    • Molybdenum (Mo) (in 316): 2-3%
  • Duplex Stainless Steels (e.g., 2205):

    • Iron (Fe): Balance
    • Chromium (Cr): 22-23%
    • Nickel (Ni): 4.5-6.5%
    • Molybdenum (Mo): 3-3.5%
    • Manganese (Mn): Up to 2%
    • Silicon (Si): Up to 1%
  • Ferritic Stainless Steels (e.g., 430):

    • Iron (Fe): Balance
    • Chromium (Cr): 16-18%
    • Carbon (C): 0.12% max
    • Manganese (Mn): Up to 1%
    • Silicon (Si): Up to 1%

Physical Properties:

The physical properties of stainless steel H-beams vary by grade but generally include:

  • Density: Approximately 7.8 g/cm³
  • Tensile Strength:
    • Austenitic: 520-750 MPa
    • Duplex: 620-880 MPa
    • Ferritic: 450-600 MPa
  • Yield Strength:
    • Austenitic: 210-450 MPa
    • Duplex: 450-600 MPa
    • Ferritic: 280-450 MPa
  • Elongation:
    • Austenitic: 40-60%
    • Duplex: 20-30%
    • Ferritic: 20-30%
  • Hardness:
    • Varies by grade and condition (e.g., annealed, hardened)
  • Corrosion Resistance: Excellent, especially in austenitic and duplex grades
  • Thermal Conductivity: Lower than carbon steel
  • Magnetic Properties: Non-magnetic (austenitic), magnetic (ferritic and some duplex)

Specifications:

Stainless steel H-beams are produced according to various international standards, including:

  • ASTM A276: Standard specification for stainless steel bars and shapes.
  • ASTM A484/A484M: Standard specification for general requirements for stainless steel bars, billets, and forgings.
  • ASTM A240/A240M: Standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications.
  • EN 10088-3: European standard for stainless steels.
  • JIS G4303: Japanese standard for stainless steel bars.

Features:

Key features of stainless steel H-beams include:

  • Corrosion Resistance: High resistance to rust and corrosion, making them suitable for harsh environments.
  • Strength and Durability: High tensile and yield strength ensures structural integrity and long service life.
  • Versatility: Suitable for a wide range of applications across various industries.
  • Aesthetic Appeal: Attractive appearance with a variety of surface finishes.
  • Workability: Good formability and machinability, allowing for complex shapes and structures.
  • Heat Resistance: Excellent performance at high temperatures, particularly in grades like 304, 316, and duplex.
  • Low Maintenance: Requires minimal upkeep due to its corrosion resistance and durability.
  • Recyclability: Environmentally friendly, as stainless steel can be fully recycled.
  • Magnetic Properties: Varies by grade, with non-magnetic properties in austenitic grades and magnetic properties in ferritic and some duplex grades.

Our Certifications

Packaging and Shipping

1. Wood pallet packing cover with water-proof paper
2. Steel pallet packing cover with water-proof paper
3. Wood box packing
4. Steel pallet packing cover with steel box
5. In bundles with steel strip no extra packing

package and shipment

Advantage

  • High Precision Dimension: The carbon steel profile has excellent processing technology good molding and easy welding. Thickened material, stable performance, and high hardness, not easy to rust.
  • Low Friction: Low dissipation factor. More durable than most ordinary domestic bearings. Lower operating costs​
  • Life Is Long: High-quality steel through strict quality inspection, quality control layer-by-layer detection, and reliable quality, long service life.
  • Customization: Drawings and samples can be processed and customized. Conventional large-scale spot, non-standard customization.
Scroll to Top

GET IN TOUCH WITH US